protectME fabric & upholstery protector is suitable for most fabrics including cotton, suede, leather, synthetics, wool and silk. protectME is suitable for surfaces inside and outside the home, and for commercial use.

Before applying protectME, vacuum any surfaces thoroughly & remove any existing stains. If you are applying to clothes or shoes, clean in cold water only to remove any traces of detergents or softeners. Be sure to remove any cleaning products prior to application.

How to apply protectME:

1. Check your fabric
   Shake well and apply to a small test area for colour fastness. Not all textiles are colourfast.
2. Spray away
   Spray an even layer from 6 inches in a back & forth motion so that textile becomes moist.
3. Wait for it
   Allow a minimum of 12 hours for coating to cure. In temperatures below 64°F allow up to 24 hours.
4. Test for coverage
   By spraying a little water on the textile. Small beads should form on the surface. If not, additional application may be required.

For more information, please read our How to use page.

The 1.32 gallon bottle protects approx. 538 ft² of fabric or 269 ft² if 2 coats are necessary.

For more information on how much product to apply, read our FAQs page.

Our products never contain harsh chemicals such as Hydrotreated heavy naphtha (petroleum), Propane/Butane/Isobutane/Ethylbenzene, Octamethylcyclotetrasiloxane, Flammable Aerosol. Most of these are present in traditional stain protectors and are highly toxic to our health and the environment. No parabens, sulphates, phosphates, petrochemicals, chlorine, soap, alcohol or dyes.

For more information, please read our Ingredients page.

• Our products are cruelty free, made without animal testing in Australia
• Our products are vegan and do not include any animal products
• Our bottles are made of BPA-free plastic, fully recyclable, including labels
• We offer bulk sizes to encourage refills and limit the amount of plastic used