Before / after

We love spill tests and we cannot lie.

red wine spill test protectME products
milk spill test protectME products
water spill test protectME products
coke spill test protectME products

Why you need protectME

Where have you been all my life?

High performance

A protection that lasts up to 3 years and can survive machine washes, steam cleaning and professional cleaning sessions.

Gentle but effective

No toxic chemicals or fumes, odourless, water based, nanotechnology product. Safe for your family and the planet!

All rounder

Spray all your fabrics and upholstery items around the house, including β€˜delicates’ like suede, microfibre, linen, wool, silk and more.

What our customers are saying

Take your pick

Fabric Protector
Savings Pack

$87.90 $84.95

πŸ’§ 1 x 25.4 fl.oz Fabric Protector

πŸ’§ 1 x 67.6 fl.oz Fabric Protector Medium Refill

⚑ Protects up to 296 ft2 of fabric

A little bottle that goes a long way, thanks to our trusty Medium Refill.

Save $ and save the planet with less plastic!

Fabric Protector
Dual Pack

$55.90 $52.95

πŸ’§ 2 x 25.4 fl.oz Fabric Protector

⚑ Protects up to 161 ft2 of fabric

Two are better than one β€” make sure you’re covered with our Dual Pack, great for sneaky touch ups and second coats.

Fabric Protector
25.4 fl.oz


πŸ’§ 1 x 25.4 fl.oz Fabric Protector

⚑ Protects up to 80.7 ft2 of fabric

A great option for small surfaces: armchairs, cushions or dining chairs; or some of your favourite (or more likely to be stained) wardrobe pieces.


Getting started

For most standard upholstery and fabric surfaces we recommend using 3.3 fl. oz of fabric protector per 10 ft2 of surface per coat. It doesn’t need to be exact, just make sure the fabric is saturated with product. Please note saturating does not apply for leather, suede and velvet. We recommend a light spray and then gently β€œbuffing” the product into the fibres with a soft, clean cloth. If you are spraying large areas, we recommend using our battery sprayer to ensure even application and avoid wrist fatigue.

Some fabrics will require a second coat of product to be applied with an additional 100ml per ft2 within 30 minutes of the first application. These include but are not limited to:

  • Heavy or thick fabrics, as they tend to be more absorbent, such as heavyweight linen;
  • Textured fabrics or materials, like woven fabrics where the weave is particularly visible; rugs and carpets, especially shaggy type ones with long strands;
  • Outdoor fabrics, especially if not kept undercover or exposed to the elements;
  • Highly absorbent fabrics and materials, such as linen andΒ juteΒ ;
  • Napped or pile fabrics β€” please readΒ β€˜Does protectME work on napped fabrics such as velvet, suede or microfiber?’

If you are unsure about the type of fabric you have or have any questions, send our friendly customer service team aΒ messageΒ and include a photo of your fabric and we’ll do our best to help you

protectME is a water based, non toxic fabric protector that is safe to use on most fabric or textile surfaces: cotton, suede, leather, synthetics, wool and silk to name a few. Different fabrics will require different amounts of product to be protected, please readΒ β€˜How do I know how much product to apply?’  on our FAQs page to find out more.

Some precautions:

  • As some colour dyes are not colour fast, particularly rugs that are using vegetable dyes for example (usually vintage or handmade rugs), we recommend testing the surface in a small inconspicuous area for colour fastness prior to applying all over.
  • If you have applied another fabric protector prior to using protectME, please read ’Can I apply protectME after applying another fabric protector?’.

Before applying protectME, vacuum any surfaces thoroughly & remove any existing stains. If you are applying to clothes or shoes, clean in cold water only to remove any traces of detergents or softeners. Be sure to remove any cleaning products prior to application.

How to apply protectME:

  1. Check your fabric Shake well and apply to a small test area for colour fastness. Not all textiles are colourfast.
  2. Spray away Spray an even layer from 15cm in a back & forth motion so that textile becomes moist.
  3. Wait for it Allow a minimum of 12 hours for coating to cure. In temperatures below 18Β°C allow up to 24 hours.
  4. Test for coverage By spraying a little water on the textile. Small beads should form on the surface. If not, additional application may be required.

For more information, please read our How to use page.

If you have applied another fabric protector prior to using protectME, we recommend waiting until the other protector has worn off, especially if using a mainstream stain guard such as Scotchgard or Guardsman. This is usually about 12 months after application. This is because these fabric protectors sit on top of the fabric and will prevent protectME from bonding properly. Unlike these protectors, protectME is formulated with nanotechnology and will get into the fabric, forming a much stronger and durable protective barrier that lasts up to 3 years.

No, protectME does not smell, it’s completely free of fragrances or masking scents, unlike traditional fabric protectors.

For more information about ingredients, please read the dedicated page.

protectME is made with pure silica (SiO2), an inert substance found in nature in things like sand or quartz; and that is already in use in many products such as glass or the water we drink. We only use non-toxic, eco-friendly ingredients, and our fabric protector spray is water based. Maybe more importantly, ingredients we do not use (and that you really don’t want to spray in your house):

  • PFAS, also known as PFOA, PFOS, PFCs/Fluorocarbons, GenX,
    No parabens, sulphates, phosphates, petrochemicals, chlorine, soap, alcohol or dyes,
    Fragrances or colours.


For more information, please read our Ingredients page or ask us for our Safety Data Sheet.

Skip to content