For most standard upholstery and fabric surfaces we recommend using 100ml per square meter (M2) per coat. It doesn’t need to be exact, just make sure the fabric is saturated with product. Please note saturating does not apply for leather, suede and velvet. We recommend a light spray and then gently “buffing” the product into the fibres with a soft, clean cloth. If you are spraying large areas, we recommend using our battery sprayer to ensure even application and avoid wrist fatigue.
Some fabrics will require a second coat of product to be applied with an additional 100ml per M2 within 30 minutes of the first application. These include but are not limited to:
If you are unsure about the type of fabric you have or have any questions, send our friendly customer service team a message and include a photo of your fabric and we’ll do our best to help you
protectME is a water based, non toxic fabric protector that is safe to use on most fabric or textile surfaces: cotton, suede, leather, synthetics, wool and silk to name a few. Different fabrics will require different amounts of product to be protected, please read ‘How do I know how much product to apply?’ to find out more.
If you have applied another fabric protector prior to using protectME, we recommend waiting until the other protector has worn off, especially if using a mainstream stain guard such as Scotchgard or Guardsman. This is usually about 12 months after application. This is because these fabric protectors sit on top of the fabric and will prevent protectME from bonding properly. Unlike these protectors, protectME is formulated with nanotechnology and will get into the fabric, forming a much stronger and durable protective barrier that lasts up to 3 years.
protectME is resistant to PH levels between 2-13. Acidic substances have PH levels under 2 and are unfortunately not comprised within the range of what protectME can protect against. For example, vomit (stomach acid) is highly acidic and has a PH level of about 1. While we are on the delightful topic of bodily fluids, be reassured that protectME does protect against most other commonly bodily fluids, such as blood, saliva, urine and more merrily substances.
protectME is primarily intended to repel liquid stains. It will certainly help cleaning oily stains (chocolate, tomato sauce, sunscreen etc) and dirt marks but we can’t guarantee that there will be no marks left. This is especially true when force is applied onto the fabric, i.e. fingers smudging chocolate all over your new couch. Please always use a light dabbing motion when trying to remove liquids from protected fabrics, trying to absorb the liquid or stains into a cloth, rather than scrubbing with force.
protectME can be used on velvet, suede or microfibre and most fabrics with a nap such as melton, flannel, serge, camel’s hair, sweatshirt fleece, brushed denim, mohair, lamb’s wool, velveteen, corduroy, fleece, terry cloth, or fake fur. We recommend using a soft brush to help raise the nap of the fabric and ensure even product distribution, once protectME has been sprayed on.
You can read our blog post about velvet here: https://protectmeproducts.co/au/blog/microfibre-suede-couches-why-clean-when-you-can-protect/
protectME can be used on rugs and carpets. Most of them will require two coats of fabric protector, because they are made of thick and absorbent materials. This is all the more true if the rug or carpet has got a high pile — shaggy rugs are the perfect example. We recommend brushing the rug or carpet with the back of a broom in a back and forth motion after you have sprayed protectME on the surface area, to ensure even coating. Applied properly, protectME will be able to coat each individual strand of material, making the fabric water repellent and stain proof. However, liquids can still get in between the strands, so always be very careful and meticulous when dabbing off liquids.
It is best to clean up liquid spills as quickly as possible and with the least amount of force possible. Please always use a light dabbing motion when trying to remove liquids from protected fabrics, trying to absorb the liquid or stains into a cloth, rather than scrubbing with force. This is all the more true for oily stains, please see ‘Does protectME protect against oily stains and dirt marks?’.
No, protectME does not smell, it’s completely free of fragrances or masking scents, unlike traditional fabric protectors. For more information about ingredients, please read the dedicated page.
Most traditional fabric protectors have a very strong chemical smell and require the area to be evacuated during and after treatment has taken place (never a good sign, is it?). protectME is completely odourless and does not release any fumes during or after application. If you can, we always recommend to spray your items outside, to avoid accidentally spraying other areas or items you may not want to.
Please read our How to apply page for more information.
Being a water-based fabric protector, the surface will normally be dry after 3-4 hours. Please note that it will take 12-24 hours to fully cure, depending on the temperature.
Our eco-friendly fabric protector will typically last for up to 3 years before a reapplication is required, which is about 3 times longer than most traditional fabric protectors. Be mindful of semi-regularly checking areas that are exposed to more abrasion — for example, that one spot where you sit on the couch every day.
Our non toxic fabric protector is UV stable and will not break down when exposed to UV rays (even Australian ones), unlike other fabric protectors. However, this does not mean that fabric colours won’t fade in the sun — this is because to achieve this, we would need to include an agent that makes fabrics look waxy in our formulation.
Despite our waterproof coating being UV stable (does not break down when exposed to UV rays), it does not prevent fading of the fabric colours in the sun. This is because to achieve this, we would need to include an agent that makes fabrics look waxy in our formulation. Applying our eco-friendly fabric protector (or any other fabric protector for that matter) does not increase the SPF rating of a fabric or textile.
We don’t recommend applying protectME to “dry clean only” fabrics as our fabric protector is water based and using our product on materials like this may cause slight colour loss or fading.
Our eco-friendly waterproof spray is resistant to abrasion and machine washable (up to 30 washes). It’s also resistant to steam cleaning (up to 180 degrees Celsius) and commercial cleaning.
protectME is made with pure silica (SiO2), an inert substance found in nature in things like sand or quartz; and that is already in use in many products such as glass or the water we drink. We only use non-toxic, eco-friendly ingredients, and our fabric protector spray is water based. Maybe more importantly, ingredients we do not use (and that you really don’t want to spray in your house):
For more information, please read our Ingredients page or ask us for our Safety Data Sheet.
If you would like to read our Safety Data Sheet, please contact us or check the Ingredients page.
PFAS or polyflurorinated alkyl substances are highly toxic synthetic chemicals, which are harmful to our health and the planet. They are also known as PFOA, PFOS, PFCs/Fluorocarbons or GenX.
They are present in most traditional fabric protectors. They have been shown to have a causal link to changes in the liver, thyroid and pancreas, as well as hormonal changes, which can lead to potential cancer risk. PFAS are very persistent in the environment and in the human body – meaning they don’t break down and they can accumulate over time.
For more information, please read our Ingredients page and this blog article.
Yes, our eco-friendly fabric protector is made without animal testing and doesn’t use any animal products.
Our technology was developed in Europe and our products are made in Australia. We are a family business based in Melbourne, Victoria.
protectME is a nanotechnology fabric protector, whereas other traditional fabric protectors are not. The key differences are:
protectME is a water based fabric protector, which means that is it not solvent based and won’t release any fumes unlike other protectors. Our protector is made with pure silicon dioxide, an inert substance that surrounds us in nature as sand or quartz; the most abundant family of materials on Earth. For more information, please read our Ingredients page.
Our non-toxic fabric protector is the preferred choice for those suffering from allergies. It is odourless. For more information on ingredients, please read the Ingredients page.
We only use BPA free and highly recyclable plastic, including our labels. We have chosen PET and HDPE plastic bottles as they are easily recyclable and accepted through most recycling plants. We offer bulk sizes to encourage refills and limit the amount of plastic used. We are a conscious business trying to reduce our impact on the planet, and always striving to improve.
If you have any questions, feedback or concerns, we’re only an email away.
Typically orders are dispatched from our warehouse by the next business day after payment being received. Longer dispatch can be expected at peak buying times.
Your order will be sent via Australia Post’s e-Parcel service. Once dispatched you will be notified by email and a tracking number will be supplied.
You should expect your delivery within 5-7 business days or 7-10 business days for WA and remote areas. Progress of the delivery can be tracked via the Australia Post website.
Credit card payments are processed using Stripe. We do not store or have access to any credit card details during or after the transaction.
If you have a PayPal account, you can also use this for instant payment.
We also offer ZIP – pay later for all eligible Australian customers.
Get in touch!