Carpet and rugs make for a cosy home, however everyday spills, dirt, and traffic can take their toll. Regular vacuuming can help but stains can be hard to remove and consequently reduce the look, feel and longevity of your carpet or rug.
Carpet flooring, rugs, floor mats, jute rugs and more.
Use between 80-100ml per m2 depending on the absorbency of the surface. For thicker textiles a second coat may be required.
Allow a minimum of 12 hours for coating to cure. In temperatures below 18°C allow up to 24 hours.
2-3 years depending on traffic and use.
Our products won't release toxic fumes. They are odourless & safe for your family.
We care about the planet & about making our products as ethically as we can.
protectME is a water based, non toxic fabric protector that is safe to use on most fabric or textile surfaces: cotton, suede, leather, synthetics, wool and silk to name a few.
For most standard upholstery and fabric surfaces we recommend using 100ml per square meter (M2) of fabric, per coat. It doesn’t need to be exact, just make sure the fabric is saturated with product.
Please note saturating does not apply for leather, suede and velvet. We recommend a light spray and then gently “buffing” the product into the fibres with a soft, clean cloth. If you are spraying large areas, we recommend using our battery sprayer to ensure even application and avoid wrist fatigue.
Some fabrics will require a second coat of product to be applied with an additional 100ml per M2 within 30 minutes of the first application. These include but are not limited to:
If you are unsure about the type of fabric you have or have any questions, send our friendly customer service team a message and include a photo of your fabric and we’ll do our best to help you.
Moist carpet doesn’t always show its dampness, and the moisture can be trapped below the surface. In other words, mould can appear on carpets and rugs without any major exposure to water or other liquids.
But fear not, mould is stoppable! When it comes to mould on carpets in your home, preventative measures are the most successful. Follow these 3 simple steps to avoid the musty odour, discolouration and the constant combat to remove mould from your carpet!
For more information, read Mould on carpets: How to avoid it.
Yes you can! Given it’s woven with thick, natural fibres, jute rugs tend to be rather absorbent and removing stains can become tricky. Luckily, adding a protective layer to your rug should repel most stains or spills. Our non toxic fabric protector spray is a breathable, invisible coating that will protect while maintaining your rug’s natural appearance for up to 3 years per application.
Given that jute fibres high absorbency, we recommend to increase the standard 100ml of fabric protector per M2 of surface t0 double.
Contact our customer service team for further assistance!
Our carpet protector spray is a non toxic stain guard that will keep your carpets and rugs looking their best for the long term. Water based and formulated with nanotechnology, protectME offers the future in high-tech liquid and stain proofing for carpets and rugs, as well as the rest of the household.
protectME is an eco friendly fabric protector & stain guard.